Push-In type Displacement Transducer/ Crack meter Model IG-2002 & Perimetric Joint meter Model IG-2002 XYZ
The model IG2002 crackmeter consists of a spring-loaded, compression-type vibrating wire displacement transducer and two installation brackets. One mounting bracket supports the displacement transducer while the other is anchored across the joint onto the reference surface. The spring-loaded shaft of the displacement transducer is always in contact with the reference surface at the other side of the crack. The sliding rod senses the movement between the two anchors and gives a frequency output, which is read by the indicator.
For measurement in three orthogonal directions IG2002XYZ or perimetric joint meter is used. This version has three sets of displacement transducer assemblies installed across the crack in three mutually perpendicular directions. Free movement of the sliding shaft in all directions ensures accuracy of measurement.
Specifications:
Crack Meter | |
---|---|
Standard Ranges | Non-linearity %fs 50mm, 100 mm, 150mm. 1%fs |
Material (outer body) | Stainless steel |
Operating Temperature | -10 to 60°C |
Coil Resistance Thermistor | 140-160 Ohm @ 25°C YSI 44005 or equivalent(3k Ohm @ 25°C) |
Dimension | Citel 90V Gas Discharge tube 20 mm dia |
Cable | 1m, 4 core shielded. |
Surge arrestor